Adjustable Front Track Bar | Jeep JK Wrangler (2 Door) & Wrangler Unlimited (4 Door) with 2.0"-6.0" Lift

Application: 2007-2017 Jeep® JK Wrangler (2 Door) & Wrangler Unlimited (4 Door)

The Mountain Goat Series™ adjustable front track bar is a necessary upgrade on any lifted Jeep® JK Wrangler. The length of our adjustable front track bar is easily adjusted to perfectly center the front axle housing beneath your Jeep® JK Wrangler.

Our adjustable front track bar is compatible with virtually any suspension system, from 2.0" to 6.0" of lift, and allows for easy adjustment changes as your vehicle modifications require. The use of minimum 2.0" long front bump stop extensions is recommended.

The ends of our adjustable front track bar feature greaseable Delrin® bushings on the chassis end and a high strength forged 4130 chrome moly Del-Sphere™ pivot joint on the front axle housing end. These were chosen to provide no flex under steering loads and maximum off-road performance and articulation while minimizing the transfer of road noise and vibrations on the street.

Manufactured from massive 1.25" x 0.281" wall 1026 DOM tubing, our adjustable front track bar is 100% TIG welded and precison formed to ensure proper geometry and optimum clearance of most aftermarket differential covers. A brilliant and durable powder coated finish in your choice of the above colors provides excellent protection from corrosion, rocks, and debris.

Also included are (2) 9/16" Grade 8 mounting bolts, (4) 9/16" Grade 8 flat washers and (2) Grade 9 steel locking nuts. A common cause of death wobble along with front track bar mount hole egging on the Jeep® JK Wrangler is the fact that the factory uses non-shouldered (all threads) 14mm mounting bolts and have oversized (+9/16") mounting holes in both front track bar mounts. Our extreme duty 9/16" mounting hardware that is included with our adjustable front track bar will cure these issues and provide for extremely strong fastening strength.

Why do lifted Jeep® JK Wranglers need an adjustable front track bar?

The front track bar controls the lateral (side to side) positioning of the front axle housing. It is attached to the chassis on the driver's side and to the front axle housing on the passenger's side. When you lift your Jeep® JK Wrangler it changes the distance between the mounting points and moves the front axle housing out of alignment (pushed off to one side).

The fixed length of the factory front track bar won't allow for length adjustments to re-center the front axle housing. Unless corrected, this misalignment will place stress on suspension, steering, and driveline components, create alignment problems, and prevent proper suspension and front sway bar disconnect operation.

Del-Sphere™ Pivot Joint:

Think of the Del-Sphere™ pivot joint as a Delrin® bushed spherical rod end. The Delrin® bushing cups absorb shock and road noise so you get the quiet and smooth ride of a bushing as well as 22° of rotation! Designed and manufactured exclusively by Spohn Performance, we have taken suspension performance to the next level.

Our Del-Sphere™ pivot joint features a one piece forged and heat treated 4130 chrome moly housing, a heat treated and chrome plated chrome moly spherical ball, Delrin® bushing cups, heat treated retainer washers and snap ring, an external grease fitting, and a beautiful silver zinc plated housing finish.

We doubt you'll ever need to replace the Delrin® bushing cups, but they certainly can be. Unlike a spherical rod end, the Del-Sphere™ pivot joint is 100% rebuildable.

Mountain Goat Series™ Adjustable Front Track Bar Specifications & Features:

• Manufactured from massive 1.25" x 0.281" wall DOM tubing that is precison formed to ensure proper geometry and optimum clearance of most aftermarket differential covers.
• 100% TIG welded construction for the ultimate in appearance, strength, and durability.
• Compatible with virtually any suspension system, from 2.0" to 6.0" of lift, and allows for easy adjustment changes as your vehicle modifications require.
• CNC laser cut 3/16" steel gusset is solid TIG welded in place to ensure there is no track bar bend fatigue or flex under steering loads.
• Chassis end mounts with Delrin® bushings with a grease fitting for easy lubrication that provide for zero bushing deflection under steering loads and a smooth and quiet ride. The bushing end is reinforced with a solid TIG welded CNC laser cut 3/16" steel gusset for maximum strength and durability.
• Front axle housing end mounts with a high strength forged 4130 chrome moly Del-Sphere™ pivot joint that provides for 22° of unrestricted articulation.
• The Del-Sphere™ pivot joint is designed for narrow track bar mounts so the housing will not contact the mount at full rotation.
• Designed to mount directly to the factory front track bar mounts or to any aftermarket front axle housing mounted relocation brackets.
• Includes new high strength Grade 8 and Grade 9 mounting hardware to eliminate the "slop" from the factory.
• Available powder coated in your choice of the above colors for a brilliant and durable finish.
• Easy 100% bolt on installation with the use of basic hand tools.
• Proudly hand crafted by skilled craftsman in PA - USA!