Moser Engineering - M9 Rear End - Complete - Mild Steel - Universal Custom Builders

Moser Engineering M9 Rear End | Mild Steel | Universal Custom Builders

Click Image for Larger View

$2956.00

SKU #: MoserM9-MS

Brand: Moser Engineering

* Indicates a required field.

Choose Your Options:
* Measurement "A"	Enter measurement "A" (Maximum Length = 63.00")
* Measurement "B"	Enter measurement "B"
* Measurement "C"	Enter measurement "C"
* Center Section:
* Axle Options:
* Axle Flanges:
* Case Type:
* Gear Ratio:
* Wheel Studs:
* Wheel Stud Pattern:
* Back Brace:
* Powder Coat Housing:
* Rear Brakes:
* If Stock Rear Brakes:	Enter the vehicle year, model and type of brakes
* Brake Lines:
* Emergency Brake Cable:
* Brake Line Clamps:

OR + Add to Wish List OR ‹ Continue Shopping

Description

Application: Universal - Bare Rear End For Custom Build - Mild Steel

If you have questions regarding rear ends and their options read the "Ordering A Rear End - The Master FAQ List" article in our Support Center.

The Moser Engineering M9 rear end housings are made to not only withstand the demands of high horsepower applications, but also finish off the back half of any show vehicle with style.

The Moser M9 bolt-in rears are made from 1/8" thick CNC laser cut mild steel, which is fabricated from one triangulated piece of metal. Combine that with a 3/8" thick face plate, and standard internal gussets and bulk heads and the M9 is ready to take on the toughest racing conditions. Also included are custom machined fill and drain vents and wheel stud kit.

This is a "Bare" rear end, meaning there are no suspension mounting brackets installed. Use this rear end for custom applications where you will be custom building your suspension or adapting this rear end to a vehicle that does not have a bolt in ready rear end available. Look at the second picture listed to see the dimensions we need to know for the length of the rear end and then fill them in to the corresponding option boxes.

This rear end assembly will ship to you unassembled. You'll get the housing, axles and center section (fully set up) in three seperate containers. This makes it easy to do the fabrication work you need to do to the housing, and then once completed you can slide in the axles and bolt in the center section and you're ready to roll!

Specifications:

Uses 3.00" x .250" thick DOM axle tubing
Powder coating available
Your choice of housing ends
Made from 1/8" thick laser cut mild steel
1350 Pinion Yoke

The M9 is available with many options, please select the components you wish to have your rear built with from the drop down option boxes. If you have any questions on the best set up for your application, email our tech department for assistance in making the right choices.

Shipping: The Moser M9 rear ships via UPS Ground.