Spohn Performance | Support Center

Search Results for "g-body lsx swap"

101. I'm ordering a Ford 9" rear end, do I need the fill and drain bungs in... [Article]
     Ford 9" rear ends have an option for a fill and/or drain bung to be installed on the housing. The Ford 9" center section
102. I'm ordering a rear end, do I need the conversion u-joint? [Article]
     All Moser and Strange Engineering rear ends come with a 1350 pinion yoke that requires a 1350 u-joint for connection to t
103. I'm ordering a rear end for a 1982-2002 F-Body Camaro Firebird, do I need t... [Article]
     If you are ordering a Moser Engineering rear end for your 1982-2002 F-Body Camaro and Firebird we ask if you want a
104. What rear end gear ratio should I run for my application? Gear ratio calculator ... [Article]
     To determine the best rear end gear ratio for your application we recommend using this handy
105. The tubular steering brace wonder bar doesn't seem to clear my fan housing ... [Article]
     1982-1992 GM F-Body cars that came equipped with the factory dual electric fans will have to trim down the plastic mounti
106. Can I use 4th Gen rims with no spacers on Moser or Strange rear ends on my 1982-... [Article]
     If you have a 1982-1992 GM F-Body Camaro or Firebird and want to run 1993-2002 fourth gen GM F-Body rear rims or C5, C6 Corvette, etc. rear rims and do not w
107. Can I still remove my t-tops with your roll bar or roll cage installed? [Article]
     Yes, with our 8 point roll bar or 10 point roll cage installed you can still remove and install your t-tops as you normally would in your 1982-2002 GM F-Body
108. What are the specifications to run a 15" x 10" rim on a 1982-1992 F-Bo... [Article]
     On the Thirdgen 1982-1992 F-Body Camaro and Firebird you want to use a 15" x 10" x 5.5" back spacing rear rims. These rims will fit inside of the wheel well with no rolling of the lip and only mi
109. I have your 742 or 743 Front Upper A-Arms and they won't line up with the m... [Article]
     A common question we get from people when installing the front upper a-arms on their 1993-2002 F-Body Camaro and Firebird is about the a-arms not quite lining up with the vehicle mount.
110. SKU# 743 - Installation Instructions [Article]
     Installation instructions are attached below for: SKU #
111. SKU# 742 - Installation Instructions [Article]
     Installation instructions are attached below for: SKU #
112. What size u-joint is on your driveshaft? Can I order one for a stock rear end an... [Article]
     Yes. All of our driveshafts are built with 1350 weld yokes on the front and rear. If you specify you have a 1310, 1330 or a stock rear end we use a 1350 to X conversion u-joint. So, if later down
113. SKU# H-207 - Installation Instructions [Article]
     Installation instructions are attached below for: SKU #
114. 2010 Chevrolet Camaro Parts Reference Guide and Schematics [Article]
     Open the .pdf attachment below (or click here) to view t
115. Can I get a Ford 9" rear end set up for 3 channel ABS for my 1993-2002 GM F... [Article]
     Yes, the Moser Engineering
116. What transmission mount bushing do I need to use with your 1982-1992 F-Body, Cam... [Article]
     If you’re using a stock type transmission mount bushing that has a male stud hanging out of it, you can not use this type of mount with some of our crossme
117. How do I know what size sway bars I have? I want to order bushings but don'... [Article]
     1993-2002 GM F-Body Camaro and Firebird cars came from the factory with 30 mm front and 19 mm rear sway bars. For the 1982-1992 GM F-Body and most other vehicles the dia
118. Why don't your SKU# 982 torque arm mounting bolts hardware kit work with a ... [Article]
     The factory rear end uses two long bolts that go through the top and bottom of the torque arm's rear mount. Our SKU#
119. Do you offer a power rack and pinion option for your 1982-1992 F-Body Camaro Fir... [Article]
     As of this time we only offer the
120. Can I run the front coil over kit for the 1982-1992 GM F-Body Camaro Firebird wi... [Article]
     The front coil-over kits for